Neumann KH 120-A Monitor Pair and Dangerous Music Source Monitoring System Kit
-
2 x Neumann KH 120-A Studio Monitor
Frequency Response |
Free Field: 52 to 21,000 Hz ±3 dB Pass Band Free Field: 54 to 20,000 Hz ±2 dB |
Self Noise |
< 20 dB(A) at 10 cm |
Total Harmonic Distortion (THD) |
> 100 Hz (<0.5% at 96 dB SPL at 1 m) |
Max SPL Level |
Full Space: 105.1 dB Half Space at 3% THD at 1 M: 111.1 dB
Short Term SPL with IEC-Weighted Noise: 107 dB(C) With Music Material at 2.3 m (pair): 97 dB(C) (full range), 104 dB(C) (with subwoofer)
Long Term SPL with Pink Noise at 2.3 M, In Typical Listening Conditions (single/pair): 88/93 dB(C) SPL (full range, 89/94 dB(C) SPL (with subwoofer) |
Bass Capability |
104.8 dB |
Amplifier |
Woofer: 50 W (80 W peak) Tweeter: 50 W (80 W peak) |
Controller Design |
Analog, active |
Crossover Frequency |
2,000 Hz |
Crossover Slope |
24 dB/octave, 4th order |
Equalization |
Bass: 0, -2.5, -5. -7.5 dB Mid: 0, -1.5, -3, -4.5 dB High: +1, 0, -1, -2 dB |
Protection Circuits |
Limiter, low, high |
Infrasonic filter protection |
30 Hz; 6 dB/octave |
Impedance |
10 k Ohms in position 94/108 dB SPL at 1 m 20 k Ohms in position 100/114 dB SPL at 1 m |
Input Gain Control |
0 to -15 dB |
Output Level Control |
94, 100, 108, 114 dB |
CMRR |
>56 dB at 15,000 Hz |
Maximum Input Level |
24 dBu |
Indicators |
Power On: Neumann logo "white" Limit/Clip: Neumann logo "red" |
Power Supply |
100 to 240 V; 50/60 Hz |
Power Consumption |
Idle: 20 W Full Output AC: 200 W |
Cabinet |
Painted aluminum, anthracite (RAL 7021) Powder-coated aluminum, white (RAL 9016) |
Operating Conditions |
+50 to +104° F (+10 to +40° C) <90% relative humidity, non-condensing |
Drivers |
Magnetically Shielded Woofer: 5.25" (130 mm) Tweeter: 1.00" (25.0 mm) |
Mounting |
2x M8 on rear panel |
Volume |
Internal: 6.5 liters External: 9.7 liters |
Dimensions (H x W x D) |
10.875 x 7.125 x 8.625 (277.0 x 182.0 x 220.0 mm) |
Weight |
14.1 lb (6.40 kg) |
Box Dimensions (LxWxH) |
16.2 x 14.2 x 11.2" |
-
Dangerous Music Source Digital/Analog Monitoring Device
Frequency Response |
Input 1 to selected line out and speakers: +0, -0.5 dB from <10 Hz to >80,000 Hz Input 2 to selected line out and speakers: +0, -0.5 dB from <10 Hz to >80,000 Hz |
THD + N |
Input 1 to selected line out and speakers: <0.0025% at +4 dBu Input 2 to selected line out and speakers: <0.0025% at +4 dBu |
IMD |
Input 1 to selected line out and speakers: <0.0025% at +4 dBu Input 2 to selected line out and speakers: <0.0026% at +4 dBu |
Crosstalk Rejection Typically @ 1 kHz |
Input 1 to selected line out and speakers: > 108 dB Input 2 to selected line out and speakers: > -98 dB Digital Input: >103 dB |
Noise |
Input 1 to selected line out and speakers: < -93 dB, un-weighted Input 2 to selected line out and speakers: < -90 dB, un-weighted
Note: Input 2 can run at -10 dBV or -16 dBV |
Maximum Input Level |
> +26 dBu |
Sample Rate |
AES: Inputs lock from 32 to 192,000 Hz |
THD + N |
<0.004% |
Headphone Outputs |
2 x 1/4" TRS phono jacks |
Balanced Output |
Meters: yes Speakers: yes |
Output Impedance |
Up to 600 Ω at > +26 dBu |
Volume Control |
Better than ± 0.5 dB from unity to -40 dB |
Maximum Output Level |
> +26 dBu |
Mac |
OS X 10.6 or higher for driverless plug and play |
PC |
Requires a driver for Windows operating systems up to Windows 7 Not currently compatible with Windows 8 |
Power Supply |
12V at 2A |
Dimensions (W x D x H) |
12.75 x 8 x 1.625" (32.39 x 20.32 x 4.128 cm) |
Weight |
5.5 lb (2.5 kg) |
Box Dimensions (LxWxH) |
18.3 x 13.6 x 6.8" |
-
2 x Auray IPRS-M Stabilizing Isolation Pad for Studio Monitors (Medium, Single)
Dimensions |
10.25 x 12.75" (26.3 x 32.3 cm) |
Box Dimensions (LxWxH) |
13.4 x 10.6 x 3.3" |
-
2 x Kopul Studio Elite 4000 Series XLR M to XLR F Microphone Cable - 6' (1.8 m), Black
Cable Type |
3-Pin XLR balanced microphone cable |
Length |
6' (1.8 m) |
Shielding |
98% coverage braided shield |
Gauge |
24 AWG |
Contacts |
Silver |
Connector 1 |
XLR Male |
Connector 2 |
XLR Female |